38
Safety, Installation and Operations Manual – Translation of original instructions
The pump is delivered suitably packaged. Make a visual inspection of the packaging for damage.
After opening, carefully remove the packaging and check the integrity of the parts.
Record any significant damage to the product in the transport documents.If articles are missing, contact Zenit (or its dealer) or the forwarders.
Take special care not to injure yourself with sharp tools and not to damage to the product, especially the electrical wiring.
3.2 Storage
During storage, the electric pump must be kept in a suitable place, out of the reach of children or those with diminished responsibility, suitably
secured against falling and protected from damp, vibrations, dust and extreme temperatures (below -20°C/-4°F and above +60°C/140°F).
Models with cooling jacket use a 30% water-glycol mixture as coolant; this mixture retains its properties intact down to a temperature of -13°C
(9°F). At lower temperatures, the mixture becomes more viscose but it does not solidify completely, and it can therefore be used without damaging
the pump.
However, the condition of the coolant mixture and the mechanical seal sump oil should be checked before using the product if it has been exposed
to low temperatures.
EN
To Next Page
Loading...
