Zenith System 3 - VCR Mode Chart

MAINTENANCE AND TROUBLESHOOTING
VCR MODE CHART 1. OUTPUT TO TV FROM ANTENNA OUT JACK ON VCR
The operatingmode of yourVCR determines what type of
(START) a program source is provided, and whether the audio is
HERE stcl'€Oormonaural Use this flowchartto determine the
operatingstatus ofyour VCR, so thatyou can select the
properviewingsource and channelon yourTV. Select the
VCR outputchannel (3or 4) on yourTV to viewtapes or to
see programs selected by using the channel tuner in the
VCR.
ANTENNA
OR CABLE-TV
INPUT TO VCR
ALL
ANTENNA
OR CABLE-TV
CHANNELS
TO TV
VCR POWER
IS OFF
STEREO
AUDIO
IF TV IS
CAPABLE
(
_r
\VCR POWER/
VCR POWER
IS ON
SWITCH IN TV
POSITION
Duringtape playback,we recommendyou use the AUDIO
and VIDEO outputjacks on yourVCR for improvedper-
formance.
SWITCH IN VCR
POSITION
TVNCR switch may be
marked W/VIDEO
onsome VCI_.
ALL
ANTENNA
ORCABLE-TV
CHANNELS
TO "IV
STEREO
AUDIO
IF TV IS
CAPABLE
VCR TUNER
SELECTS
CHANNELS TO
BE SEEN ON "IN
CHAN 3/4
NO
YES
VIDEO TAPE
PROVIDES
PROGRAM TO
BE SEEN ON TV
CHAN 3/4
MONAURAL
AUDIO
ONLY
MONAURAL
AUDIO
ONLY
VCR ANTENNA
OUTPUT TO "IN
VCRMODEt 11 -- 3