Memories
Page 104 Solution & Solution XL Operating Manual – Issue 1.0
Playing Back Memories
The Playback X controls on the front panel together with the Memories
Window on the Main LCD and monitor are used to play back the programmed
memories in the memory stack.
Memories Window
The Memories Window on the Main LCD and monitor displays the Current
and Next memories on the memory stack. It is recommended that this
window is on display when playing back memories and must be on display if
you wish to play back memories out of sequence.
Selecting the Next Memory
When the GO key is pressed the Current and Next memories are incremented
automatically. Therefore to output the memories in the stack in numerical
order, simply press the GO key at the appropriate times.
To select a different memory to be output next – move the cursor to the Next
memory number field, then use the + and – keys or the UP and DOWN arrow
keys to select the next memory to be output. The Next memory to be output is
highlighted by a yellow bar.
To Next Page
Loading...
Need help?
General