Setup
Page 64 Solution & Solution XL Operating Manual – Issue 1.0
Clear Options
This option allows you to clear (delete) various components of a show file (eg palettes, groups, memories, submasters etc.), clear the whole show, or reset the desk
back to factory defaults.
Press [Clear Options] MFK. The various clear options are displayed as follows:
Figure 53 - Clear Options
Clear Options and Reset Desk
Select the required option. A confirmation window is displayed. Select the [Yes] button to confirm the clear option or the [No] button to cancel the operation. A
summary of the Clear Options is given below:
Clear Colour Palettes … Clear DMX Patch - Clears the specified items only from the show data in the desk.
Clear All – Clears all of the above items from the show in the desk, but does not clear the Patch or change any of the Setup options.
Reset Desk – Performs the Clear All operation, clears the Patch and resets all the Setup options to factory defaults.
Tip: Holding SHIFT and pushing Reset Desk will reset the desk to factory defaults AND prompt for the Operation Mode when rebooted. This mode is
good for equipment rental suppliers who may wish to ship the desks out with this option visible the first time a user boots the desk.
To Next Page
Loading...
Need help?
General