Setup
Page 52 Solution & Solution XL Operating Manual – Issue 1.0
Outputs
Press the [Outputs] MFK or button on the monitor. The various options are shown on the MFKs and monitor. These are summarised below:
Figure 37 - Desk Setup (Outputs)
DMX Output 1 to DMX Output 4 – The four DMX outputs on the rear of
the desk can be configured as Universes 1 to 4, individually. Default is
Universe 1 from Output 1 through to Universe 4 from Output 4. By setting
multiple outputs to the same universe, the desk will behave as a DMX
splitter, giving the same signal from those ports. This is sometimes useful
for routing data in a flexible venue scenario
To Next Page
Loading...