Memories
Solution & Solution XL Operating Manual – Issue 1.0 Page 95
Chase Modifiers
Example Memory Setup Window for a chase:
Figure 75 - Memory Setup Window (Chase)
Select the [Direction] option, then select the required direction (Forwards,
Backwards, Bounce or Random).
Select the [Drive] option, then select the required drive (Auto, Manual, Bass or
Beat).
Select the [Speed] option, then enter the chase speed (1 – 600 beats per
minute). This can be set using the fixture wheels, as well as numerically.
Select the [Brightness Attack] option, then select the required attack (Snap,
Slow Attack, Slow Decay or Crossfade).
Select the [Colour Action] option, then select the required action (Snap or
Fade).
Select the [Beamshape Action] option, then select the required action (Snap
or Fade).
Select the [Position Action] option, then select the required action (Snap or
Fade).
Select the [Shots] option, then enter the number of shots requires (0 – 255).
Select the [OK] button to complete the operation.
To Next Page
Loading...