85
CPSW Menu Structure
2. Navigate to the location containing your configuration files. Configuration files
have a file name extension of “.cf1”. The default location is C:\CPSW Config
Files\.
3. Double-click the appropriate .cf1 file.
Once loaded, the system name of this configuration appears in the window’s title
bar adjacent to “CPSW” and the CPSW version number. When ZETRON prepares
the configuration file, the system name is also the first seven letters of the
filename.
Editing a Configuration
There are two types of configuration settings: position and system. Position configuration
refers to the settings specific to a single console position, such as the button layout and
preferences for that position. System configuration refers to overall system settings such as
channel types, paging formats, and I/O.
System Settings
Channel Configuration
♦ To configure channels
1. Click Edit, System Configuration, Channel Configuration.
2. Select the channel number to configure using the up and down arrows next to
Channel Number.
3. Enter a Channel Name. Channel Name is used for reference only, and can be left
blank if desired.
Note CPSW configuration files ending in “.cf1” are used for M4010 and
M4010R consoles.
CPSW files ending in “.cfg” are used for M4x18 (Series 4000)
consoles.
Tip If custom configuration files were provided by Zetron, they are
located on the supplied 3.5” floppy disk.
Warning! Prior to configuring the system, it is imperative that the
programmer has a complete understanding of the radio system
that is to be controlled by the Model 4010 console.
STOP
Tip It is best to configure system settings before position settings.
Some position settings, such as specific key definitions, are not
available until the system settings are configured correctly.
To Next Page
Loading...
