ZKTeco EC16 User Manual

EC16 Elevator Control Panel & DEX16 Elevator Floor Extension Board User Manual
P a g e | 32 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
5.1.6.2 Set Access by Levels
Add personnel to the elevator control level group.
1. Click [Elevator] > [Elevator Control Rule] > [Set Access By Levels] to enter the setting interface.
2. Check the levels group and click the [Add Personnel] icon in its bar to open the settings window.
3. Select the person and then click to move it to the selected column on the right.
4. Click [OK] to confirm and exit.
5.1.6.3 Set Access By Person
Edit the elevator control level group for personnel.
1. Click [
Elevator
] > [
Elevator Control Rule
] > [
Set Access By Person
] to enter the setting interface.
2. Check the levels group and click the [Add to Levels] icon in its bar to open the settings window.
3. Select the levels group and then click to move it to the selected column on the right.
4. Click [OK] to confirm and exit.

ZKTeco EC16 Specifications

General

Brand	ZKTeco
Model	EC16
Category	Computer Hardware
Language	English