ZKTeco EC16 User Manual

EC16 Elevator Control Panel & DEX16 Elevator Floor Extension Board User Manual
P a g e | 33 Copyright©2023 ZKTECO CO., LTD. All rights reserved.
5.1.6.4 Set Access By Department
Edit the elevator control level group for the department.
1. Click [
Elevator
] > [
Elevator Control Rule
] > [
Set Access By Department
] to enter the setting
interface.
2. Check the department and click the [
Add to Default Levels
] icon in its bar to open the
settings window.
3. Select the levels group and then click to move it to the selected column on the right.
4. Click [
OK
] to confirm and exit.
5.1.6.5 Direct Selection Floor Setting
You can set a direct selection floor for users or visitors here; or set other floors that can be selected in
addition to the direct selection floor.
 Direct Selection Floor
1. Click [
Elevator
] > [
Elevator Control Rule
] > [
Direct Selection Set
] to set the floor that can be
reached directly for personnel.
2. Click the query icon to search the list of editable personnel.
3. Check the people you need to set in the list, and click icon to add direct access to the floor for
the people.

ZKTeco EC16 Specifications

General

Brand	ZKTeco
Model	EC16
Category	Computer Hardware
Language	English