MultiBio700- User Manual
eSSL Pvt. Ltd. Page 13
4. If the verification is not successful, the device will prompt “Please try again”.
2. 1:1 fingerprint verification
In the 1:1 fingerprint verification mode, the device compares
current fingerprint collected through the fingerprint sensor with
that in relation to the user ID entered through the keyboard.
Adopt this mode only when it is difficult to recognize the
fingerprint.
1. Press [1:1] on the screen or [1:1] button to enter the 1:1
fingerprint recognition mode.
2. Enter user ID and then press the "Fingerprint” icon to enter
the 1:1 fingerprint recognition mode. If the prompt
“Unregistered user!” is displayed, the user ID does not exist.
3. Press your finger on the fingerprint sensor by adopting the
proper finger placement. For details, see 1.3 Finger Placement.
To Next Page
Loading...
