ZKTeco MultiBio 700 - Entering a Name

MultiBio700- User Manual
eSSL Pvt. Ltd. Page 23
3.2 Entering a Name
Use T9 input method to enter the user name through the
keyboard.
1. Press [Name] on the [Add User] interface to display the name
input interface.
2. On the displayed keyboard interface, enter a user name and
press [X].
For details of operations on the keyboard interface, see Appendix
1 T9 Input Instructions.
3. After the user name is entered, press [Save] to save the
current information and return to the previous interface. Press
[Exit] to return to the previous interface without saving the current information.
Tip: The device supports the 1 to 12 characters names by default.