MultiBio700- User Manual
eSSL Pvt. Ltd. Page 29
3.8 Enroll Photos
If you had enrolled your photo in the system, the system will
display your enrolled photo in addition to your ID and name after
you pass the verification.
1. Press [Photo] on the [Add User] interface to display the photo
enrollment interface.
2. On the photo enrollment interface, stand naturally in front of
the screen. For details, see 1.1 Standing Position, Posture and
Face Expression. Press [Capture] to capture the photo.
3. After taking the photo, press [Exit] to return to the previous
interface.
4. After the photo is taken, press [Save] to save the current information and return to the
previous interface; press [Exit] to return to the previous interface without saving the
current information.
To Next Page
Loading...
