MultiBio700- User Manual
eSSL Pvt. Ltd. Page 25
3. 4 Enrolling a Password
1. Press [Password] on the [Add User] interface to display the
password management interface.
2. On the displayed keyboard interface, enter a password and
press [OK]. Re-enter the password according to the system
prompt and then press [OK].
Tip: The device supports 1-8 digit passwords by default.
3. After the password is entered, an interface is displayed as
shown below. Press [Save] to save the current information and
return to the previous interface. Press [Exit] to return to the
previous interface without saving the current information.
To Next Page
Loading...
