Setting the UNDO function
This turns on/off the undo function that can be used to undo the last recorded overdub of a loop.
1. Turn on the Looper Effect Setting Screen (→ Setting the looper effect).
Setting Explanation
ON This enables the UNDO function.
OFF This disables the UNDO function.
NOTE:
The looper recording time is 1.5 – 40 seconds (20 when UNDO is ON) for stereo, and 1.5 – 80 seconds (40
when UNDO is ON) for mono. To switch between stereo and mono, see “Setting the looper effect”.
68
To Next Page
Loading...
Need help?
General
