→ Selecting tracks for recording
→ Connecting input equipment
2. Connect headphones.
3. Input audio from connected equipment.
To listen to the sound of already recorded tracks, press the button to play them.
4. Adjust the volume.
The volume level is shown at the left side of the screen while the volume is being adjusted.
Enabling stereo linking
Two adjacent tracks can be stereo-linked. This enables two tracks to be handled as one stereo pair.
• Stereo links can only be set for track pairs 1/2 and 3/4.
• Stereo-linked tracks have the following characteristics.
- Odd-numbered tracks are assigned to the L channel while even-numbered tracks are assigned to the
R channel, and the PAN setting is disabled.
- The fader of the odd-numbered track adjusts the volume. The fader of the even-numbered track has
no effect.
38
To Next Page
Loading...
Need help?
General
