Zte ZXR10 8900 Series - Connecting the Cabinets; Figure 42 Remove Screw of Angle Support; Figure 43 Remove the Angle Support

Chapter419”StandardCabinetInstallation
ConnectingtheCabinets
Toconnectmanycabinets,performthefollowingsteps.
1.Positionthecabinetsinthesamerow.Adjusthighadjustable
nutincabinetfootfromrstcabinetinleft,adjusttheheight
betweencabinetandoor ,onerowofcabinetsmustbeon
sameline.Theverticalityofcabinetsmustbelessthan3mm.
2.Tightenlockingnutfromlefttorightandmakeitpastedto
cabinet.Makesurethatthefeetandcabinetareconnected
rmly.
3.Removetheanglesupportoncabinettop.Theanglesupport
isusedtoconnectthenearcabinets.Rotatetheanglesupport
90degrees.Connecttheanglesupportsbacktoback.The
installationorderisshowninFigure42,Figure43andFigure
44.
FIGURE42REMOVESCREWOFANGLESUPPORT
1.Fastenscrews2.Anglesupport
FIGURE43REMOVETHEANGLESUPPORT
CondentialandProprietaryInformationofZTECORPORATION49