ZyXEL Communications LTE2566-M634 - 17.4 Local MGMT

Chapter 17 MGMT Interface
LTE2566-M634 User’s Guide
104
Figure 76 Configuration > Management > MGMT Interface > Local MGMT
The following table describes the labels in this screen.
17.5 Remote MGMT
Use this screen to configure through which IP address the LTE2566-M634 can be accessed. Click
Configuration > Management > MGMT Interface > Remote MGMT to open the following screen.
Note: The firewall will be disabled when remote management is enabled. To activate the
firewall, you’ll need to create a new firewall rule to allow the remote management
traffic to come in from the WAN side.
Table 45 Configuration > Management > MGMT Interface > Local MGMT
LABEL DESCRIPTION
HTTPS
HTTPS Select Enable to allow all LAN connections to access the LTE2566-M634 using HTTPS.
Port This is the port number that the computer must use to access the LTE2566-M634.
HTTP
HTTP Select Enable to allow all LAN connections to access the LTE2566-M634 using HTTP.
Port This is the port number that the computer must use to access the LTE2566-M634.
Apply Click Apply to save your changes back to the LTE2566-M634.