ZyXEL Communications LTE2566-M634 - Wireless LAN Advanced Settings

Chapter 8 WLAN
LTE2566-M634 User’s Guide
68
Figure 47 Configuration > Network > Wireless LAN > MAC Filter
The following table describes the labels in this screen.
8.6 Wireless LAN Advanced Settings
Use this screen to allow wireless advanced features, such as the output power, RTS/CTS Threshold
settings.
Click Configuration > Network > Wireless LAN > Advanced. The screen appears as shown.
Table 23 Configuration > Network > Wireless LAN > MAC Filter
LABEL DESCRIPTION
MAC Address
Filter Mode
Define the filter action for the list of MAC addresses in the MAC Filter table.
Select Allow listed stations to permit access to the LTE2566-M634, MAC addresses not listed will
be denied access to the LTE2566-M634.
Select Deny listed stations to block access to the LTE Device, MAC addresses not listed will be
allowed to access the LTE2566-M634.
Select Disable to turn MAC filtering off on the LTE2566-M634.
# This field displays the index number of the MAC address entry.
Active Select the check box to activate so the MAC Filter applies to this wireless device.
Name Enter a descriptive name for the wireless device that are allowed or denied access to the
LTE2566-M634.
MAC Address This field displays the MAC addresses of the wireless devices that are allowed or denied access
to the LTE2566-M634.
Click Add to enter or change the MAC address of the wireless devices that are allowed or
denied access to the LTE2566-M634 in this field. Enter the MAC addresses in a valid MAC address
format, that is, six hexadecimal character pairs, for example, 12:34:56:78:9a:bc.
Delete Click Delete to remove the MAC address entry.
Apply Click Apply to save your changes back to the LTE2566-M634.