Chapter 6 Monitor
LTE2566-M634 User’s Guide
46
The following table describes the labels in this screen.
6.4 ARP Table
Address Resolution Protocol (ARP) is a protocol for mapping an Internet Protocol address (IP address) to
a physical machine address, also known as a Media Access Control or MAC address, on the local area
network.
Use the ARP table to view IP-to-MAC address mapping(s).
Figure 32 Monitor > ARP Table
The following table describes the labels in this screen.
Table 10 Monitor > DHCP Table
LABEL DESCRIPTION
# This is the index number of the host device.
Host Name This field displays the device host name.
IP Address This field displays the IP address relative to the # field listed above.
MAC Address This field shows the MAC address of the device with the name in the Host Name field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve Select this if you want to reserve the IP address for this specific MAC address.
Refresh Click Refresh to update this screen.
Apply Click Apply to save your changes back to the LTE2566-M634.
Table 11 Monitor > ARP Table
LABEL DESCRIPTION
# This is the index number of the entry.
IP Address This is the learned IPv4 or IPv6 IP address of a device connected to a port.
MAC Address This is the MAC address of the device with the listed IP address.
To Next Page
Loading...
