LTE2566-M634 User’s Guide
24
CHAPTER 2
Web Configurator
2.1 Introduction
The Web Configurator is an HTML-based management interface that allows easy LTE2566-M634 setup
and management via Internet browser. Use a browser that supports HTML5, such as an Internet Explorer
11, Mozilla Firefox, or Google Chrome. The recommended screen resolution is 1920 by 1080 pixels.
In order to use the Web Configurator you need to allow:
• JavaScript (enabled by default).
2.2 Accessing the Web Configurator
1 Use the included USB cable to connect your LTE2566-M634 to a computer (refer to the Quick Start
Guide).
2 Make sure your computer has an IP address in the same subnet as the LTE2566-M634. Your computer
should have an IP address from 192.168.1.2 to 192.168.1.254. See your computer help or refer to Section
21.5 on page 135.
3 Launch your web browser. Go to http://192.168.1.1.
4 A login screen displays. To access the administrative Web Configurator and manage the LTE2566-M634,
type the default username admin and password 1234 in the login screen and click Login. If you have
changed the password, enter your password and click Login.
5 The following screen displays if you have not changed your password yet. Enter a new password, retype
it to confirm, and click OK.