Chapter 11 DHCP Server
LTE2566-M634 User’s Guide
84
11.3 Advanced DHCP Server Setting
This screen allows you to assign IP addresses on the LAN to specific individual computers based on their
MAC addresses. You can also use this screen to configure the DNS server information that the LTE2566-
M634 sends to the DHCP clients.
To change your LTE2566-M634’s static DHCP settings, click Configuration > Network > DHCP Server >
Advanced. The following screen displays.
Figure 61 Configuration > Network > DHCP Server > Advanced
The following table describes the labels in this screen.
11.4 DHCP Client List
The DHCP table shows current DHCP client information (including IP address, Host Name and MAC
address) of network clients using the LTE2566-M634’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Configuration > Network > DHCP Server > Client List.
Note: You can also view a read-only client list by clicking Monitor > DHCP Server.
Table 33 Configuration > Network > DHCP Server > Advanced
LABEL DESCRIPTION
Static DHCP Table
# This is the index number of the static IP table entry (row).
IP Address Type the LAN IP address of a computer on your LAN.
MAC Address Type the MAC address (with colons) of a computer on your LAN.
To Next Page
Loading...
