Chapter 8 WLAN
LTE2566-M634 User’s Guide
60
settings manually. Depending on the devices in your network, you can either press a button (on the
device itself, or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices.
Then, they connect and set up a secure network by themselves. See how to set up a secure wireless
network using WPS in the Section 4.2 on page 32.
8.2 The General Screen
Use this screen to enable the wireless LAN, enter the SSID and select the wireless security mode.
Note: If you are configuring the LTE2566-M634 from a device connected to the wireless LAN
and you change the LTE2566-M634’s SSID, channel or security settings, you will lose your
wireless connection when you press Apply to confirm. You must then change the
wireless settings of your device to match the LTE2566-M634’s new settings.
To access this screen, click Configuration > Network > Wireless LAN > General.
To Next Page
Loading...
