Chapter 8 WLAN
LTE2566-M634 User’s Guide
61
Figure 42 Configuration > Network > Wireless LAN> General
The following table describes the labels in this screen.
Table 19 Configuration > Network > Wireless LAN > General
LABEL DESCRIPTION
Wireless Setup - 2.4G / Wireless Setup - 5G
Wireless LAN Status Select Enable to activate the 2.4G / 5G wireless LAN. Select Disable to turn it off.
You can also enable or disable the 2.4G/5G wireless LANs by using the WLAN/WPS button
located on the side panel of the LTE2566-M634.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical English
language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
To Next Page
Loading...
