Chapter 1 Get to Know Your LTE2566-M634
LTE2566-M634 User’s Guide
18
The following table describes the labels in this screen.
Note: You can only use Web Configurator to select the date of the month on which the
LTE2566-M634 restarts calculating the amount of data used every month. See Section
7.6 on page 56 for more information.
1.5.4 WiFi Setting
To enable the WiFi clients (up to 32) to connect to the 2.4GHz / 5GHz WiFi band, press the left or right
button to go to WiFi Setting and the center button to select it. The following screen displays.
Figure 10 WiFi Setting Screen
Table 4 Data Usage Screen
LABEL DESCRIPTION
Usage This displays the mobile data used in total by your LTE2566-M634 in Kilobytes (KB),
Megabytes (MB), or Gigabytes (GB).
UL This displays the amount of data in KB/MB/GB currently uploaded by the LTE2566-
M634.
DL This displays the amount of data in KB/MB/GB currently downloaded by the LTE2566-
M634.
Data Limitation Use the Web Configurator to set a data cap which prevents you from using a certain
amount of data.
Click to Enable notification on the LCD when 80% and 100% of data usage is
reached. For example, you can set the limit at 100 MB. The LCD will display Data
Usage Reach 80% Limit when 80% of data usage is reached. Once you reach that
limit, the LCD will display ! Data Usage Reach 100% Limit and your cellular data will
turn off.
To continue using data after the limit is reached, click Enable to disable data
limitation.
Menu Click this button to return to the Menu list.
To Next Page
Loading...
