LTE2566-M634 User’s Guide
121
CHAPTER 19
TR-069
19.1 Overview
This chapter explains how to configure the LTE2566-M634’s TR-069 auto-configuration settings.
19.2 TR-069 Settings
TR-069 defines how Customer Premise Equipment (CPE), for example your LTE2566-M634, can be
managed over the WAN by an Auto Configuration Server (ACS). TR-069 is based on sending Remote
Procedure Calls (RPCs) between an ACS and a client device. RPCs are sent in Extensible Markup
Language (XML) format over HTTP or HTTPS.
An administrator can use an ACS to remotely set up the LTE2566-M634, modify settings, perform firmware
upgrades as well as monitor and diagnose the LTE2566-M634. You have to enable the device to be
managed by the ACS and specify the ACS IP address or domain name and username and password.
Click Configuration > Management > TR-069 to open the following screen. Use this screen to configure
your LTE2566-M634 to be managed by an ACS.
Figure 97 Configuration > Management > TR-069
To Next Page
Loading...
