LTE2566-M634 User’s Guide
58
CHAPTER 8
WLAN
8.1 Overview
This chapter discusses how to configure the wireless network settings in your LTE2566-M634.
The following figure provides an example of a wireless network.
Figure 41 Example of a Wireless Network
The wireless network is the part in the blue circle. In this wireless network, devices A and B are called
wireless clients. The wireless clients use the access point (AP) to interact with other devices (such as the
printer) or with the Internet. Your LTE2566-M634 is the AP.
8.1.1 What You Can Do in this Chapter
• Use the General screen to enable the wireless LAN, enter the SSID and select the wireless security
mode (Section 8.2 on page 60).
• Use the Guest AP screen to set up multiple wireless networks on your LTE2566-M634 (Section 8.4 on
page 66).
• Use the MAC Filter screen to deny wireless clients based on their MAC addresses from connecting to
the LTE2566-M634 (Section 8.5 on page 67).
• Use the Advanced screen to allow intra-BSS networking and set the RTS/CTS Threshold (Section 8.6 on
page 68).
• Use the WPS SetUp screen to activate WPS via PBC or PIN configuration (Section 8.7 on page 69).
• Use the WPS Station screen to add a wireless station using WPS (Section 8.8 on page 70).
To Next Page
Loading...
