Chapter 7 WAN
LTE2566-M634 User’s Guide
55
7.4 .IPv6
Use this screen to configure the LTE2566-M634’s IPv6 settings. Click Configuration > Network > WAN > IPv6
from the Configuration menu. The screen appears as shown next.
Figure 38 Configuration > Network > WAN > IPv6
The following table describes the labels in this screen.
7.5 PIN Management
Use this screen to enable PIN code authentication. Click Configuration > Network > WAN > PIN
Management. The screen appears as shown next.
Table 16 Configuration > Network > WAN > IPv6
LABEL DESCRIPTION
IPv6 Select Enable to allow the LTE2566-M634 to run IPv6. Otherwise, select Disable.
DNS Setting Select Auto to have the LTE2566-M634 get the IPv6 DNS server addresses from the ISP
automatically. Select Manual to have the LTE2566-M634 use the IPv6 DNS server
addresses you configure manually.
LAN IPv6 Address Enter the IPv6 address for the LTE2566-M634 LAN interface in this field.
LAN IPv6 Link-Local Address This shows the IPv6 Link-local address in the LAN side. This is used by LTE2566-M634
when communicating with neighboring devices on the same link. It allows IPv6-
capable devices to communicate with each other in the LAN side.
To Next Page
Loading...
