Chapter 3 Setup Wizard
LTE2566-M634 User’s Guide
33
6 For Wireless setting- Setup - 2.4G, select WPA2-PSK and enter a pre-shared key from 8 to 63 case-
sensitive characters, including special characters and numbers for data encryption. The 2.4G wireless
clients which want to associate with this wireless network must have the same wireless security settings.
Otherwise, select OPEN to allow any client to associate with this network without any data encryption or
authentication. Click Next.
Figure 26 Wizard: Security Setup - 2.4G
7 For Wireless setting- Setup - 5G, select WPA2-PSK and enter a pre-shared key from 8 to 63 case-sensitive
characters, including special characters and numbers for data encryption. The 5G wireless clients which
want to associate with this wireless network must have the same wireless security settings. Otherwise,
select OPEN to allow any client to associate with this network without any data encryption or
authentication. Click Apply to save your settings. Otherwise, click Back to go back to the previous
screens. You are now ready to access the Internet and allow wireless clients to connect to your LTE2566-
M634. For more information about Wireless LAN see Section 8.2 on page 60.
Figure 27 Wizard: Security Setup - 5G
To Next Page
Loading...
