Chapter 5 Status
LTE2566-M634 User’s Guide
42
The following table describes the labels in this screen.
Table 9 Home
LABEL DESCRIPTION
Device Information
Host Name This field displays the LTE2566-M634 system name. It is used for identification.
Model Number This shows the model number of your Zyxel device.
Firmware Version This is the current version of the firmware inside the LTE2566-M634.
Firewall This shows Enable when the firewall is activated. Otherwise, it shows Disable.
WAN Information (These fields display when you have a WAN Connection)
To change from WAN information to LAN Information click the gray arrow .
MAC Address This shows the WAN Ethernet adapter MAC address of your device.
IP Address This field displays the current IPv4 address of the LTE2566-M634 in the WAN.
IP Subnet Mask This field displays the current subnet mask in the WAN.
Default Gateway This shows the WAN port’s gateway IP address.
Operation Band This field displays the frequency band on which your ISP is operating.
LAN Information
To change from LAN information to WAN Information click the gray arrow .
MAC Address This shows the LAN MAC (Media Access Control) Address of your LTE2566-M634.
IP Address This is the current IPv4 address of the LTE2566-M634 in the LAN.
IP Subnet Mask This is the current subnet mask in the LAN.
DHCP This field displays what DHCP services the Device is providing to the LAN. Choices are:
Server - The Device is a DHCP server in the LAN. It assigns IP addresses to other devices in the
LAN.
None - The Device is not providing any DHCP services to the LAN.
IPv6 Address This is the current IPv6 address of the LTE2566-M634 in the LAN.
System Status
System Up Time This field displays how long the LTE2566-M634 has been running since it last started up. The
Device starts up when you plug it in, when you restart it (Maintenance > Reboot), or when
you reset it.
Current Date/Time This field displays the current date and time in the Device. You can change this in
Maintenance > Time.
System Resource
CPU Usage This field displays what percentage of the LTE2566-M634’s processing ability is currently used.
When this percentage is close to 100%, the LTE2566-M634 is running at full load, and the
throughput is not going to improve anymore.
Memory Usage This field displays what percentage of the Device’s memory is currently used. Usually, this
percentage should not increase much. If memory usage does get close to 100%, the
LTE2566-M634 is probably becoming unstable, and you should restart the device.
Signal Status
SIM Status This displays the status of the attached SIM card. No SIM displays if there is no SIM card
inserted.
Signal Strength This displays the current signal strength to the mobile network.
Signal Type This shows the type of the mobile network (LTE and 3G) to which the LTE2566-M634 is
connecting.
New Message This displays the number of new messages received in your SIM card.
To Next Page
Loading...
