ZyXEL Communications LTE3301-M209 - CHAPTER 16 IPv6 Firewall

LTE3301-M209 User’s Guide
111
CHAPTER 16
IPv6 Firewall
16.1 Overview
This chapter shows you how to enable and create IPv6 firewall rules to block unwanted IPv6 traffic.
16.2 What You Can Do
• Use the IPv6 Firewall screen to enable and create IPv6 firewall rules to block unwanted IPv6 traffic
(Section 16.3 on page 111).
16.3 IPv6 Firewall Screen
Click Configuration > Security > IPv6 Firewall. The Service screen appears as shown.
Figure 75 Configuration > Security > IPv6 Firewall
The following table describes the labels in this screen.
Table 51 Configuration > Security > IPv6 Firewall
LABEL DESCRIPTION
Enable Firewall Rule
Enable Firewall Rule Select this check box to activate the firewall rules that you define (see Add Firewall Rule
below).