Chapter 6 WAN
LTE3301-M209 User’s Guide
56
IPv6 Rapid Deployment
Use IPv6 Rapid Deployment (6rd) when the local network uses IPv6 and the ISP has an IPv4 network.
When the Zyxel Device has an IPv4 WAN address, you can enable 6rd to encapsulate IPv6 packets in
IPv4 packets to cross the ISP’s IPv4 network.
The Zyxel Device generates a global IPv6 prefix from its IPv4 WAN address and tunnels IPv6 traffic to the
ISP’s Border Relay router (BR in the figure) to connect to the native IPv6 Internet. The local network can
also use IPv4 services. The Zyxel Device uses it’s configured IPv4 WAN IP to route IPv4 traffic to the IPv4
Internet.
Figure 31 IPv6 Rapid Deployment
6.4 Management WAN Screen
The summary table shows you the WAN connection configured on the Zyxel Device. Click Network >
WAN > Management WAN from the Configuration menu.
Figure 32 Network > WAN > Management WAN
To Next Page
Loading...
