Chapter 7 Wireless LAN
LTE3301-M209 User’s Guide
69
Note: If you do not enable any wireless security on your Zyxel Device, your network is
accessible to any wireless networking device that is within range.
Figure 39 Network > Wireless LAN > General: No Security
The following table describes the labels in this screen.
7.3.2 WPA2-PSK
Select WPA2-PSK from the Security Mode list.
Table 22 Network > Wireless LAN > General: No Security
LABEL DESCRIPTION
Security Mode Choose No Security from the drop-down list box.
Apply Click Apply to save your changes.
Cancel Click Cancel to reload the previous configuration for this screen.
To Next Page
Loading...
