Chapter 5 Monitor
LTE3301-M209 User’s Guide
47
Figure 22 View Log
You can configure which logs to display in the View Log screen. Go to the Log Setting screen and select
the logs you wish to display. Click Apply to save your settings. Click Cancel to start the screen afresh.
Figure 23 Log Settings
5.4 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual clients to obtain
TCP/IP configuration at start-up from a server. You can configure the Zyxel Device’s LAN as a DHCP
server or disable it. When configured as a server, the Zyxel Device provides the TCP/IP configuration for
the clients. If DHCP service is disabled, you must have another DHCP server on that network, or else the
computer must be manually configured.
To Next Page
Loading...
