ZyXEL Communications LTE3301-M209 - CHAPTER 5 Monitor

LTE3301-M209 User’s Guide
46
CHAPTER 5
Monitor
5.1 Overview
This chapter discusses read-only information related to the device state of the Zyxel Device.
To access the Monitor screens, click after login.
You can also click the links in the Summary table of the Status screen to view the packets sent/received
as well as the status of wireless clients connected to the Zyxel Device.
5.2 What You Can Do
• Use the Log screen to see the logs for the activity on the Zyxel Device (Section 5.3 on page 46).
• Use the DHCP Table screen to view information related to your DHCP status (Section 5.4 on page 47).
• Use the ARP Table screen to o view the IPv4-to-MAC address mapping(s) for each device connected
to the Zyxel Device (Section 5.5 on page 48).
•use the Packet Statistics screen to view port status, packet specific statistics, the "system up time" and
so on (Section 5.6 on page 49).
• Use the WLAN Station Status screen to view the wireless stations that are currently associated to the
Zyxel Device (Section 5.7 on page 50).
• Use the LTE Modem Status screen to view the detailed information about the LTE module, cellular
interface, and SIM card. You can also check the LTE connection status (Section 5.8 on page 51).
5.3 The Log Screen
The Web Configurator allows you to look at all of the Zyxel Device’s logs in one location.
5.3.1 View Log
Use the View Log screen to see the logged messages for the Zyxel Device. The log wraps around and
deletes the old entries after it fills. Select what logs you want to see in the Log Setting screen. Click
Refresh to renew the log screen. Click Clear Log to delete all the logs.