Chapter 4 Tutorials
LTE3301-M209 User’s Guide
40
8 If the wireless client keeps trying to connect to or acquiring an IP address from the Zyxel Device, make
sure you entered the correct security key.
If the connection has limited or no connectivity, make sure the DHCP server is enabled on the Zyxel
Device.
If your connection is successful, open your Internet browser and enter http://www.zyxel.com or the URL
of any other web site in the address bar. If you are able to access the web site, your wireless connection
is successfully configured.
4.4 Using Multiple SSIDs on the Zyxel Device
You can configure more than one SSID on a Zyxel Device. See Section 7.4 on page 70.
This allows you to configure multiple independent wireless networks on the Zyxel Device as if there were
multiple APs (virtual APs). Each virtual AP has its own SSID, and wireless security type. That is, each SSID on
the Zyxel Device represents a different access point/wireless network to wireless clients in the network.
Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the Zyxel Device (such as a
printer).
To Next Page
Loading...
