ZyXEL Communications LTE3301-M209 - Page 131

Chapter 21 TR-069
LTE3301-M209 User’s Guide
131
The following table describes the fields in this screen.
Table 61 Maintenance > TR-069 Client
LABEL DESCRIPTION
TR069 Select Enable to allow the LTE3311 to be managed remotely by an ACS via TR-069.
Otherwise, select Disable.
Inform Select Enable for the Zyxel Device to send periodic inform via TR-069 on the WAN.
Otherwise, select Disable.
Inform Interval Enter the time interval (in seconds) at which the Zyxel Device sends information to the auto-
configuration server.
ACS URL Enter the URL or IP address of the auto-configuration server.
ACS User Name Enter the TR-069 user name for authentication with the auto-configuration server.
ACS Password Enter the TR-069 password for authentication with the auto-configuration server.
Connection Request
Port
Enter the port number for TR-069 connection requests.
Connection Request
User Name
Enter the connection request user name.
When the ACS makes a connection request to the Zyxel Device, this user name is used to
authenticate the ACS.
Connection Request
Password
Enter the connection request password.
When the ACS makes a connection request to the Zyxel Device, this password is used to
authenticate the ACS.
Interface Select a WAN interface through which the TR-069 traffic passes.
Apply Click Apply to save your changes.
Cancel Click Cancel to exit this screen without saving.