ZyXEL Communications LTE3301-M209 - Page 27

Chapter 2 Introducing the Web Configurator
LTE3301-M209 User’s Guide
27
The following table describes the labels shown in the Status screen.
Table 9 Status Screen
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
WAN Information
MAC Address This shows the WAN Ethernet adapter MAC Address of your device.
IP Address This shows the WAN port’s IP address.
IP Subnet Mask This shows the WAN port’s subnet mask.
Default Gateway This shows the WAN port’s gateway IP address.
IPv6 Address This shows the IPv6 address of the Zyxel Device on the WAN.
Operation Band This shows the network type and the frequency band used by the mobile network
to which the Zyxel Device is connecting.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Server or Disable.
IPv6 Address This shows the IPv6 address of the Zyxel Device on the LAN.
WLAN Information
WLAN OP Mode This is the device mode to which the Zyxel Device’s wireless LAN is set - Access
Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the Zyxel Device in the 2.4GHz
wireless LAN.
Channel This shows the channel number which you select manually.
System This shows the wireless standards the Zyxel Device supports.
Security This shows the level of wireless security the Zyxel Device is using.
Firewall This shows whether the firewall is enabled or not.
Summary
Packet Statistics Click Details... to go to the Monitor > Packet Statistics screen (Section on page
48). Use this screen to view port status and packet specific statistics.
WLAN Station Status Click Details... to go to the Monitor > WLAN Station Status screen (Section 5.7 on
page 50). Use this screen to view the wireless stations that are currently associated
to the Zyxel Device’s 2.4GHz wireless LAN.
LTE Modem Status Click Details... to go to the Monitor > LTE Modem Status screen (Section 5.7 on
page 50). Use this screen to view the detailed information about the LTE module,
cellular interface, and SIM card. You can also view the LTE connection status.
System Status
Item This column shows the type of data the Zyxel Device is recording.
Data This column shows the actual data recorded by the Zyxel Device.
System Up Time This is the total time the Zyxel Device has been on.
Current Date/Time This field displays your Zyxel Device’s present date and time.