ZyXEL Communications LTE3301-M209 - Page 67

Chapter 7 Wireless LAN
LTE3301-M209 User’s Guide
67
Figure 38 Network > Wireless LAN > General
The following table describes the general wireless LAN labels in this screen.
Table 21 Network > Wireless LAN > General
LABEL DESCRIPTION
Wireless LAN Status Select Enable to activate the 2.4GHz wireless LAN. Select Disable to turn it off.
You can also enable or disablethe 2.4GHz wireless LANs by using the WIFI button located on
the back panel of the Zyxel Device.
Name (SSID) The SSID (Service Set IDentity) identifies the Service Set with which a wireless client is
associated. Enter a descriptive name (up to 32 printable characters found on a typical English
language keyboard) for the wireless LAN.
Hide SSID Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Channel Selection Set the operating frequency/channel depending on your particular region.
Select a channel from the drop-down list box. The options vary depending on the frequency
band and the country you are in.
Refer to the Connection Wizard chapter for more information on channels. This option is only
available if Auto Channel Selection is disabled.
Auto Channel
Selection
Select this check box for the Zyxel Device to automatically choose the channel with the least
interference. Deselect this check box if you wish to manually select the channel using the
Channel Selection field.
Operating
Channel
This displays the channel the Zyxel Device is currently using.