Chapter 11 DDNS
LTE3301-M209 User’s Guide
97
The following table describes the labels in this screen.
Table 42 Dynamic DNS
LABEL DESCRIPTION
IPv4 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Service Provider Select the name of your Dynamic DNS service provider.
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
“yourhost.mydomain.net”. You can specify up to two host names in the field separated
by a comma (",").
Username Enter your user name.
Password Enter the password assigned to you.
IPv6 Dynamic DNS Setup
Dynamic DNS Select Enable to use dynamic DNS. Select Disable to turn this feature off.
Service Provider Select the name of your Dynamic DNS service provider.
Host Name The host name is the domain name that the DDNS service will map to your dynamic
global IP address. Type the host name fully qualified, for example,
“yourhost.mydomain.net”. You can specify up to two host names in the field separated
by a comma (",").
Token This is the token authentication provided by the hosting provider (i.e. FreeDDNS). When
the host name is registered, the hosting server provides the token identifier.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
To Next Page
Loading...
