ZyXEL Communications MES-3728 - Port Authentication Configuration; Activate IEEE 802.1 x Security

Chapter 16 Port Authentication
MES-3728 User’s Guide
145
16.2 Port Authentication Configuration
To enable port authentication, first activate the port authentication method(s) you want to use
(both on the Switch and the port(s)) then configure the RADIUS server settings in the Auth
and Acct > Radius Server Setup screen.
Click Advanced Application > Port Authentication in the navigation panel to display the
screen as shown.
Figure 74 Advanced Application > Port Authentication
16.2.1 Activate IEEE 802.1x Security
Use this screen to activate IEEE 802.1x security. In the Port Authentication screen click
802.1x to display the configuration screen as shown.
Figure 75 Advanced Application > Port Authentication > 802.1x