ZyXEL Communications MES-3728 - Maintenance; The Maintenance Screen

MES-3728 User’s Guide
251
CHAPTER 29
Maintenance
This chapter explains how to configure the screens that let you maintain the firmware and
configuration files.
29.1 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management >
Maintenance in the navigation panel to open the following screen.
Figure 139 Management > Maintenance
The following table describes the labels in this screen.
Table 92 Management > Maintenance
LABEL DESCRIPTION
Current This field displays which configuration (Configuration 1 or Configuration 2) is
currently operating on the Switch.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.
Restore
Configuration
Click Click Here to go to the Restore Configuration screen.
Backup
Configuration
Click Click Here to go to the Backup Configuration screen.
Load Factory
Default
Click Click Here to reset the configuration to the factory default settings.