ZyXEL Communications MES-3728 - Figure 78 Advanced Application > Classifier; Table 43 Advanced Application > Classifier

Chapter 18 Classifier
MES-3728 User’s Guide
154
Figure 78 Advanced Application > Classifier
The following table describes the labels in this screen.
Table 43 Advanced Application > Classifier
LABEL DESCRIPTION
Active Select this option to enable this rule.
Name Enter a descriptive name for this rule for identifying purposes.
Packet
Format
Specify the format of the packet. Choices are All, 802.3 tagged, 802.3 untagged,
Ethernet II tagged and Ethernet II untagged.
A value of 802.3 indicates that the packets are formatted according to the IEEE 802.3
standards.
A value of Ethernet II indicates that the packets are formatted according to RFC 894,
Ethernet II encapsulation.
Layer 2
Specify the fields below to configure a layer 2 classifier.