MES-3728 User’s Guide
75
CHAPTER 7
Basic Setting
This chapter describes how to configure the System Info, General Setup, Switch Setup, IP
Setup and Port Setup screens.
7.1 Overview
The System Info screen displays general Switch information (such as firmware version
number) and hardware polling information (such as fan speeds). The General Setup screen
allows you to configure general Switch identification information. The General Setup screen
also allows you to set the system time manually or get the current time and date from an
external server when you turn on your Switch. The real time is then displayed in the Switch
logs. The Switch Setup screen allows you to set up and configure global Switch features. The
IP Setup screen allows you to configure a Switch IP address in each routing domain, subnet
mask(s) and DNS (domain name server) for management purposes.
7.2 System Information
In the navigation panel, click Basic Setting > System Info to display the screen as shown. You
can check the firmware version number and monitor the Switch temperature, fan speeds and
voltage in this screen.
Figure 31 Basic Setting > System Info
To Next Page
Loading...
