Chapter 7 System Screens
NWA-3160 Series User’s Guide
106
Use new setting Select this if you want to change the RADIUS username and
password the NWA uses to authenticate management logon.
User Name Enter the username for this user account. This name can be up to
31 ASCII characters long, including spaces.
Password Type a password (up to 31 ASCII characters) for this user profile.
Note that as you type a password, the screen displays a (*) for each
character you type. Spaces are allowed.
Note: If you are using PEAP authentication, this password field
is limited to 14 ASCII characters in length.
RADIUS Select the RADIUS server profile of the RADIUS server that is to
authenticate management logins to the NWA.
The NWA tests the user name and password against the RADIUS
server when you apply your settings.
• The user name and password must already be configured in the
RADIUS server.
• You must already have a RADIUS profile configured for the
RADIUS server (see Section 11.2 on page 159).
• The server must be set to Active in the profile.
Apply Click Apply to save your changes.
Reset Click Reset to reload the previous configuration for this screen.
Table 18 System > Password
LABEL DESCRIPTIONS
To Next Page
Loading...
