Chapter 10 Wireless Security Screen
NWA-3160 Series User’s Guide
146
Microsoft Challenge Handshake Authentication Protocol Version 2 (MSCHAPv2) or
Generic Token Card (GTC).
Further information on these terms can be found in Appendix B on page 285.
10.2 The Security Screen
Note: The following screens are configurable only in Access Point, AP + Bridge and
MBSSID operating modes.
Use this screen to choose and edit a security profile. Click Wireless > Security.
The following screen displays.
Figure 88 Wireless > Security
The following table describes the labels in this screen.
Table 36 Wireless > Security
LABEL DESCRIPTION
Index This is the index number of the security profile.
Profile Name This field displays a name given to a security profile in the Security
configuration screen.
To Next Page
Loading...
