Chapter 24 Troubleshooting
NWA-3160 Series User’s Guide
280
3 Reboot the NWA.
4 If the problem continues, contact the network administrator or vendor, or try one
of the advanced suggestions.
Advanced Suggestions
Check the settings for QoS. If it is disabled, you might consider activating it. If
it is enabled, you might consider raising or lowering the priority for some
applications.
24.5 Wireless Router/AP Troubleshooting
I cannot access the NWA or ping any computer from the WLAN.
1 Make sure the wireless LAN is enabled on the NWA
2 Make sure the wireless adapter on the wireless station is working properly.
3 Make sure the wireless adapter (installed on your computer) is IEEE 802.11
compatible and supports the same wireless standard as the NWA.
4 Make sure your computer (with a wireless adapter installed) is within the
transmission range of the NWA.
5 Check that both the NWA and your wireless station are using the same wireless
and wireless security settings.
6 Make sure traffic between the WLAN and the LAN is not blocked by the firewall on
the NWA.
7 Make sure you allow the NWA to be remotely accessed through the WLAN
interface. Check your remote management settings.
To Next Page
Loading...
