Chapter 7 System Screens
NWA-3160 Series User’s Guide
107
7.4 Time Setting Screen
Use this screen to change your NWA’s time and date, click System > Time
Setting. The following screen displays.
Figure 73 System > Time Setting
The following table describes the labels in this screen.
Table 19 System > Time Setting
LABEL DESCRIPTION
Current Time This field displays the time of your NWA.
Each time you reload this page, the NWA synchronizes the time
with the time server (if configured).
Current Date This field displays the last updated date from the time server.
Manual Select this radio button to enter the time and date manually. If
you configure a new time and date, time zone and daylight saving
at the same time, the time zone and daylight saving will affect the
new time and date you entered.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or
the last time configured manually.
When you set Time and Date Setup to Manual, enter the new
time in this field and then click Apply.
To Next Page
Loading...
