Chapter 6 AP Controller Mode
NWA-3160 Series User’s Guide
93
6.4.1 The AP Lists Edit Screen
Use this screen to change the description or radio profile of an AP managed by the
NWA. Click Edit in the CONTROLLER > AP Lists screen. The following screen
displays.
Figure 64 The Controller > AP Configuration Screen
The following table describes the labels in this screen.
Figure 65 The Controller > AP Configuration Screen
LABEL DESCRIPTION
Model This is the model number of the managed AP.
MAC Address This is the MAC address of the managed AP.
Description Enter a short description of this access point (up to 32 English
keyboard characters).
WLAN1 Radio Profile Select the radio profile you want to use for this AP. Configure
radio profiles in the Profile Edit > Radio screen.
Select Disable if you do not want to use a radio profile. The AP’s
radio is not active when you select Disable.
Apply Click this to save the changes in this screen.
Reset Click this to return the fields in this screen to their previously-
saved values.
To Next Page
Loading...
