NWA-3160 Series User’s Guide
275
CHAPTER 24
Troubleshooting
24.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• NWA Access and Login
• Internet Access
24.2 Power, Hardware Connections, and LEDs
The NWA does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the NWA.
2 Make sure the power adaptor or cord is connected to the NWA and plugged in to
an appropriate power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the NWA.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.7 on
page 28.
2 Check the hardware connections. See the Quick Start Guide.
To Next Page
Loading...
