Chapter 23 Maintenance
NWA-3160 Series User’s Guide
271
23.6.2 Restore Configuration
Restore configuration allows you to upload a new or previously saved
configuration file from your computer to your NWA.
Do not turn off the NWA while configuration file upload is in
progress.
After you see a “restore configuration successful” screen, you must then wait one
minute before logging into the NWA again.
Figure 177 Configuration Upload Successful
The NWA automatically restarts in this time causing a temporary network
disconnect. In some operating systems, you may see the following icon on your
desktop.
Figure 178 Network Temporarily Disconnected
If you uploaded the default configuration file you may need to change the IP
address of your computer to be in the same subnet as that of the default NWA IP
address (192.168.1.2). See your Quick Start Guide for details on how to set up
your computer’s IP address.
Table 85 Restore Configuration
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click
Browse ... to find it.
Browse... Click Browse... to find the file you want to upload. Remember that
you must decompress compressed (.ZIP) files before you can upload
them.
Upload Click Upload to begin the upload process.
To Next Page
Loading...
